Digital video is a type of video system that works by using a digital representation of the brightness and colour of each pixel of the image. Black and white digital video is also possible.
Digital video encoding formats:
- CCIR 601 used for broadcast stations
- MPEG-4 ideal for mobile devices
- MPEG-2 used for DVDs and Super-VCDs
- MPEG-1 used for video CDs
- H.264 a.k.a. MPEG-4 Part 10
- Betacam SX
- Betacam IMX
- D9 (aka Digital-S)
- Digital Betacam
- MiniDV - used in most of todays consumer cameras
- DVC Pro, DVC Pro 50, DVC Pro HD
"Standard" film stocks such as 16mm and 35mm record at 24 frames per second. In the U.S. digital video films at 29.97 "frames" per second (on the NTSC system); in Europe, on the PAL system, cameras film at 25 frames per second. In these cases, the term "frames per second" is not technically correct although it is commonly used. Digital video does not have frames on a length of film; instead it scans the fields of an image, and a full scan of each of those fields is considered a "frame." For instance, the Canon XL-1 has 60 fields; a scan of each of those fields provides a complete picture; the camera completes this process of scanning each field 29.97 times each second. (There are various effects where fields can be ignored deliberately; even when every other field is ignored, the process still completes 29.97 times per second).
Provided that the video is retained in the same format (and not "recompressed", as often occurs when video is edited for distribution), digital video is a "lossless" format. That is, unlike analog sources, copies can themselves be copied without degradation in quality; a copy of the 256th generation footage will be as clear as the 1st generation footage provided that no frames have been dropped. On some capture cards or on some slower computers, the information being streamed in as the tape is rolling is coming in too fast for the computer to process, and the computer may drop a few frames. In this case the viewer typically will not notice anything visually, but the audio may "click" or "pop" briefly (for 1/30th of a second) which, oddly enough, typically will be noticed, especially in music. For this reason, it is important to process the video on equipment which can handle it.
Digital video can be processed on an NLE, or non-linear editing station, a device built exclusively to edit video and audio. These frequently can import from analog as well as digital sources, but are not intended to do anything other than edit videos. Digital video can also be edited on a personal computer which has the proper hardware (an IEEE 1394 or Firewire card and, by 2001 standards, a fairly fast processor, as well as abundant disk space) and software (Adobe Premiere, iMovie, MGI Videowave, Apple Final Cut, etc.)
Digital video has significantly lower cost then 35mm film, as the tapes can be viewed on location without processing, and can be reused on the spot. For instance, a take of a scene in 35mm would require the full attention of at least the cinematographer and director, and if both of them were happy with the take it would be sent to print. But if there is a problem that they did not notice, the print of that take is useless, as the film stock cannot be reused. Digital video is a favorite of Independent film, as the cost is much lower. For instance, the cost of the total film stock for a feature film may easily be in the tens of thousands of dollars when using 35mm, but could be as low as a few hundred dollars for digital video, even if the crew does not reuse any tapes. Digital video is also faster to work with in filming, as the results of a take can be viewed instantaneously. For this reason, George Lucas has been using digital film in filming the new Star Wars movies, with digital video assist.